When redecorating or re-designing a house, you will have a necessity to exchange a wall panel or set up new panels of MDF (medium-density fibreboard).

In our article, we’re going to cowl a step-by-step course of for how one can panel a wall with MDF simply and shortly.




#What You’ll Want

For panelling a wall with MDF, you’ll want the next:

  • MDF panels 
  • Noticed
  • Tape measure
  • Sander
  • Screws
  • Energy drill
  • Paint (non-obligatory, for design functions)
  • Step Ladder
  • Decorator’s caulk
  • Sandpaper


Step One: Take Measurements

Step one in including or changing MDF panelling in your wall is taking the suitable measurements. To measure your wall:

  • Use your tape measure to first measure the size of your wall. Be sure you take two measurements and confirm the wall size all the way down to the millimetre.
  • Arrange your step ladder and punctiliously measure the peak of your wall to the closest millimetre. All the time take two measurements.
  • Be aware your measurements down.

High Tip: all the time spherical up for measurements, as extra may be minimize away out of your panelling.


Step Two: Supply Your MDF Panels

MDF (or medium-density fibreboard) is a reasonably widespread wood sheet materials used for inside development. At MGM Timber, we offer all kinds of MDF panels for inside use. Be sure you choose a panel that can suit your measurements.

To learn the way many panels you’ll want, take the size and top measurements and divide them by the panel dimensions.

For instance, in case your wall is 12 ft in size and you’re shopping for 4 ft MDF panels, divide 12 ft by 4 ft to offer you 3 – that means you’ll want three 4 ft MDF panels.

All the time make it possible for the peak of your MDF panels matches or exceeds the peak of your wall. If an MDF panel is just too large, it may be minimize to measurement.

High Tip: moisture-resistant MDF is a superb selection over normal MDF for rooms or climates which are notably humid.


Step Three: Lower Your Panels To Measurement 

While you’ve bought your MDF, let it sit within the room it’s to be put in in for no less than 48 hours earlier than working with it. That is to account for the humidity ranges within the room and to forestall any enlargement or warping from throwing off your measurements.

After the 48 hours have handed, affirm your measurements and use your noticed to chop the MDF panels to measurement. It’s also possible to use a sander for finer particulars and to easy out any tough edges.


Step 4: Set up Your Panels

After getting eliminated your outdated panels, line up and mark the place the brand new MDF panels shall be screwed into place in your wall frames. Use a pencil to mark on the MDF panel the place you’ll be screwing them into place.

You possibly can accomplish this utilizing equal spacing between the screws and utilizing your tape measure to mark the MDF panel appropriately. Mark alongside each 300mm for a screw, and make sure to mark round 15mm from the board edges.

Now gently prop the MDF board in place and screw the board to the wall body utilizing an influence drill with a screw little bit of the suitable measurement.

In the event you can not use the pre-existing holes, or don’t wish to, house the screws out alongside the size of the body the place there are not any holes current.

Lastly, utilizing the decorator’s caulk, fill any small holes or gaps. Sand the caulk after it’s dried to create a easy, seamless joint.

High Tip: all the time drill or nail right into a wall the place you realize it’s protected to take action – don’t hit any cables or pipes!


Step 5: Enhance

With the laborious half out of the way in which, all that’s left to do is paint your new MDF board. Be sure you use wooden paint and get artistic with it!


In Abstract

Panelling a wall with MDF could appear more durable than it’s whenever you first take into account the thought, however earlier than lengthy, you’ll be an professional!

As a late piece of recommendation, all the time take two measurements and purchase round 10-20% extra MDF than you’ll want – that is to account for any breakage or human error.



How To Panel A Wall With MDF Simply & Shortly is a featured submit

Supply hyperlink

Leave a Reply

Your email address will not be published. Required fields are marked *